Extendable Snow Brush with Ice Scraper
In stock, ships within 24/48 hours
Features and dimensions
- Length folded: about 42.5 cm
- Length extended: about 65 cm
- Brush: about 25 × 8.5 cm, nylon bristles
- Scraper: about 10 cm wide, with ice-breaking teeth
- Weight: about 190 g
- Materials: telescopic aluminium alloy handle, ABS head
- Use: snow on the windscreen, rear window, side windows, roof and bonnet; ice on the windows
- Care: shake off the snow and let it dry before folding
- In the box: 1 snow brush with ice scraper
How to use it
- Extend the handle to the length you want and lock it.
- Clear the roof first, then the bonnet, windscreen, rear window and side windows, pushing the snow away from the car.
- Turn the tool round and break up the layer of ice with the scraper's teeth.
- Run the flat blade over the glass to remove the rest.
- Shake off the snow, fold the handle and put the brush back in the boot.
Why choose this snow brush
In the mountains, in the north or in any town where you park outside in winter, clearing the car is part of daily life. And it has to be done properly: driving with a half-cleared windscreen is dangerous and can get you fined, and snow left on the roof slides down onto the glass the first time you brake. With a bank card, a CD case or a small scraper, it takes forever and you end up with frozen fingers.
This brush solves both problems with a single tool: the nylon brush for fresh snow, the toothed scraper for hard ice. What makes the difference is the telescopic aluminium handle. At 65 cm, you reach the middle of the windscreen and the roof without getting your coat dirty on the bodywork; at 42.5 cm, it goes back in the boot.
It's the accessory to keep in the car from November to March, just as useful for early starts to work as for ski holidays. And it costs far less than ten minutes of idling with the demister on full.
Snow and ice cleared with a single tool
Winter mornings are all the same: the car under snow, the windows frozen, and you scraping away with your coat sleeve or a card that bends. This snow brush and ice scraper combines both in one tool: a nylon brush for snow and a scraper with ice-breaking teeth for the windscreen. The aluminium handle extends from 42.5 to 65 cm, so you can reach the middle of the windscreen and the roof without leaning against the wet bodywork. Folded, it fits in any boot.
The benefits at a glance
- Brush and scraper in one
On one side a 25 cm brush for snow, on the other a 10 cm scraper for ice. - Telescopic handle from 42.5 to 65 cm
The aluminium alloy handle extends and locks: you can reach the windscreen, rear window and roof, even on an SUV. - Ice-breaking teeth
The edge of the scraper has teeth that break up thick ice; the flat blade finishes the job. - Nylon bristles that won't scratch
The soft nylon bristles don't shed fibres and are kind to the paint: you can brush the roof and bonnet. - Light: about 190 g
Aluminium and ABS: easy to hold even with gloves, but rigid enough to push heavy, wet snow. - Always in the car
Folded, it's only 42.5 cm long: it goes in the boot, a door pocket or under a seat, ready for the first snow.
