Idée cadeau de Noël
Protections individuelles pour poignées – résistantes aux chocs et aux rayures (avant/arrière incluses)
En stock, prêt à être expédié
Expédié sous 24/48 h, livraison suivie Colissimo
Features and dimensions
- Handle cup guard: about 90 × 90 mm
- Strip: about 150 × 14 mm
- Colour: clear or carbon black
- Fixing: adhesive back
- Use: handle cup, handle, door edge, wing mirror
- Care: water and a sponge
- Contents: 8 pieces: 4 handle cup guards and 4 strips
- Logo: no logo or with custom logo
How to fit them
- Clean the handle cup and the handle thoroughly, then let them dry: the surface must be free of dust and wax.
- Hold the protector in place to see how it fits best in the recess.
- Peel off the backing film and stick it from the centre outwards to push out air bubbles.
- Press firmly, especially on the edges.
- Fit the strips the same way on the handle, door edge or wing mirror, and avoid water for a few hours.
Why choose this door handle protector
When you get into the car, your hand almost always goes into the cup with your keys or a ring. Each contact leaves a small mark and, after a few hundred openings, the paint there is dull and full of micro-scratches. That's exactly the spot a buyer notices when you sell, or that gets checked when you hand back a leased car. A handle protection film is the simplest way to avoid it: it takes the scratches, and the paint underneath stays intact.
This pack covers the whole car. The four handle cup guards measure about 90 × 90 mm and are shaped for a standard handle recess. The four 150 × 14 mm strips protect the handle or other exposed areas, such as the door edge when you park in a narrow garage.
They protect the paint without changing how the car looks. With no logo, they go almost unnoticed; with a custom logo, they become a small detail you see every time you open the door.
No more scratches behind the door handles
The cup behind the handle is the first place to get scratched on a car: keys, rings and fingernails leave fine lines in the paint every time you open the door. After a few years, you can see them from a distance, and polish only hides them for a while. This door handle protector sticks straight into the cup: keys and nails touch the film, not the paint. The pack has 8 pieces for the front and rear: 4 handle cup guards and 4 thin strips.
The benefits at a glance
- 8 pieces for the 4 doors
4 guards for the recess behind the handle and 4 thin strips. - Discreet or sporty
Depending on the version, the film lets the bodywork colour show through or adds a sporty touch. - 90 × 90 mm handle cup guard
Its shape with side cut-outs is designed for a standard handle cup and covers the area your fingers pass over when opening. - 150 × 14 mm strips, versatile
The thin strips stick onto the handle itself, the door edge or the wing mirror, anywhere that often gets knocked. - Adhesive, fitted in minutes
Clean, peel off the backing film, stick and press. - Easy to look after
The smooth surface resists water and dirt. A wipe with a sponge when you wash the car is enough.
Available with a custom logo: choose "No logo" in the menu or the logo to print on the protectors.
