Idée cadeau de Noël
Antenne voiture aileron de requin
En stock, prêt à être expédié
Expédié sous 24/48 h, livraison suivie Colissimo
Features & specs
- Material: ABS plastic shell, circuit board with copper coil
- Mounting: screw terminal onto the antenna base + 3M tape on the edge
- Seal: rubber edge at the base
- Fits: most cars with a standard screw-in whip antenna base
- Colors: black, white, silver, gray, dark gray, red, gold
- In the box: 1 shark fin antenna
How to install
- Unscrew the whip from your original antenna, leaving only the threaded base on the roof.
- Clean the roof around the base with a cloth and a little rubbing alcohol, then let it dry.
- Thread the fin's internal cable terminal onto the base.
- Peel the liner off the 3M tape on the edge, center the fin over the base and press firmly all the way around.
- Turn on the radio to check reception, and wait 24 hours before washing the car.
Why choose this shark fin antenna
A whip antenna is one of those details that dates a car. It sticks up off the roof, shakes on the highway, has to come off before every car wash and sooner or later gets bent on the garage door. Newer cars swapped it for a low, aerodynamic fin a long time ago, and fitting one to yours is one of the easiest looks upgrades you can make.
This shark fin antenna uses the base you already have. The internal cable threads onto the whip mount, the copper-coil circuit picks up the radio signal, and the shell sticks to the roof with pre-applied 3M tape. No drilling, no special tools, and in a few minutes your roofline looks clean.
It's a good pick if you want a more modern look, park in a low garage or are tired of unscrewing the whip every time you wash the car. Among the colors available, it's easy to find one close to your paint for a result that looks like it came from the factory.
Lose the whip, add a fin that matches your paint
A whip antenna on the roof gets in the way: it hits low garage ceilings, bends in the car wash and makes the car look dated. This shark fin antenna replaces it with a low, sleek shape like you see on newer cars. Inside is a circuit board with a copper coil that screws onto your original base, so your radio keeps receiving; outside, the fin sticks to the roof with pre-applied 3M tape. It comes in several colors so you can match your paint.
The benefits at a glance
- Screws onto your original base
Unscrew the whip and thread the fin's internal cable terminal onto the base. - Copper-coil circuit inside
Inside the fin is a circuit board with a copper coil connected to the antenna base. - 3M tape already on the edge
The shell has a 3M adhesive frame pre-applied all around the edge. - Rubber seal at the base
A rubber edge runs along the bottom of the fin where it meets the roof. - No more whip in the way
The fin is low and compact: it clears garages and parking decks and won't bend under car wash brushes. - Matches your paint
Pick the one closest to your paint for a factory look.
